To Next PageTo Next Page
Need help?Do you have a question about the LG FLATRONez T730SH and is the answer not in the manual?
Details screen size, deflection angle, neck diameter, and face treatment.
Covers sync types, video input voltage levels, impedance, and signal format.
Details power range, consumption modes, and LED color indicators.
Covers active video area, display colors, resolution, bandwidth, and operating conditions.
Lists physical dimensions including width, depth, height, and weight.
Highlights critical safety components and guidelines for their replacement.
Covers fire, shock, X-radiation, and handling high voltage during servicing.
Essential safety practices and general guidelines for servicing the monitor.
Techniques to protect sensitive electronic components from static electricity damage.
Best practices for soldering and unsoldering components on printed circuit boards.
Step-by-step guides for replacing ICs, transistors, diodes, and fuses.
Techniques for repairing damaged circuit board traces using jumper wires.
Detailed timing data for various video modes and resolutions.
Instructions for removing the tilt/swivel and back cover of the monitor.
Analyzes SMPS, Over Voltage, X-RAY, and Beam Limit circuits.
Describes MICOM, Video Processor, Sync, Tilt, Brightness, and OSD circuits.
Explains deflection circuits and video pre-amp/output stages.
Lists necessary tools and methods to enter the service menu.
Defines specifications for focus, size, centering, B+ voltage, and high voltage.
Procedures for adjusting distortion, size drift, linearity, and trapezoid.
Steps for white balance, color purity, and cut-off calibration.
Advanced calibration steps for white balance, focus, and color purity.
Using software for factory preset and system adjustments.
Calibrating monitor display characteristics using software tools.
Guide to editing monitor's Extended Display Identification Data.
Process for saving modified EDID data to the monitor's memory.
Diagnostic steps for when the monitor does not power on.
Steps for diagnosing a blank screen or no character output.
Guide for diagnosing problems with no screen image or raster.
Steps to troubleshoot lack of vertical image deflection.
Diagnosing issues related to Display Power Management (DPM) failure.
Troubleshooting steps if the degaussing circuit is not functioning.
Addresses horizontal deflection problems and fixed horizontal size.
Diagnosing and correcting problems with horizontal image linearity.
Troubleshooting abnormal horizontal size, side pin, and pin balance issues.
Diagnosing and fixing tilt, vertical size, and position variations.
Troubleshooting steps for high voltage and Automatic Beam Limiter (ABL) problems.
Diagnosing and resolving focus problems and FBT to CRT socket connections.
Troubleshooting for failures in the MICOM (microprocessor) and On-Screen Display (OSD).
Addresses problems with user control buttons and functions.
Diagnosing and fixing issues with color reproduction.
Troubleshooting steps for visible retrace lines on the screen.
Diagnosing and resolving color purity problems.
Solutions for image misconvergence issues.
Diagnosing and resolving problems related to poor focus.
General| Maximum Resolution | 1280 x 1024 |
|---|---|
| Contrast Ratio | 500:1 |
| Input Signal | Analog RGB |
| Screen Size | 17 inches |
| Max Resolution | 1280 x 1024 |
| Input Connectors | VGA |
