19
The Basics
s While Knock Code is in use, double-tapping the screen while it's off will turn it on
and display the Knock Code grid to allow you to enter your Knock Code.
Setting up the Knock Code feature
1. From the Home screen, touch and hold the
Recent Apps Key
(in the
Touch Keys bar) >
Lock screen settings
.
2. Tap
Select screen lock
>
Knock Code
.
3. Tap the squares in a pattern (from 3 to 8 taps) to set your Knock Code,
then tap
Done
, enter it again, then
Confirm
.
To unlock the phone
If you don’t use the phone for a while, the screen and backlight will turn off
to conserve battery power. By default, your phone's lock screen is set to
Swipe. To unlock the phone’s default Lock screen:
1. Turn the screen on.
Press the
Power/Lock Key
(on the back of the phone). The default
Lock screen will appear.
NOTE Avoid covering the proximity sensor when turning the screen on. Doing so, immediately
turns the screen off.
OR
Quickly double-tap the center of the screen (KnockON).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
