38
TOP PLATE ASSEMBLY
1. Pull out the DRAWER
2. Disassemble the
CONTROL PANEL
ASSEMBLY (refer to
previous page)
3. Unscrew the TOP PLATE (2point)
4. Push the TOP PLATE backward forcefully.
5. Lift the TOP PLATE
-Stack model- -Single model-
1. Disassemble the LID OUT
ASSEMBLY
-Remove 4 rubber caps
-Unscrew the Frame
(4point)
2. Disassemble the
CONTROL PANEL
ASSEMBLY (refer to
previous page)
WARNING
• When you disassemble the top plate, be sure to take
gloves and careful plate’s edge. Failure to do so can
cause serious injury.
To Next Page
Loading...
Need help?
General
