ESUACMOTPMYS RORRE
The connector (3-pin, male, blue) in the MOTOR
HARNESS is not connected to the connector
(3-pin, female, white) of STATOR ASSEMBLY.
The electric contact between the MOTOR HARNESS
and the MAIN PWB ASSEMBLY is bad or unstable.
The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuit).
7
LOCKED
MOTOR
ERROR
Disconnection of Card Reader Wire.
9
CARD
READER
ERROR
EEPROM is out of order.
Displayed only when the START button is first pressed
in the QC Test Mode.
8
EEPROM
ERROR
Thermister is opened or shorted.
10
Thermistor
ERROR
To Next Page
Loading...
Need help?
General
