24
INSTALLATION
10
Remove the four screws
1
, the hinge
pin brackets
2
and the hinge pin insert
3
from the bottom right side of the freezer
door.
11
Reinstall the hinge pin insert
1
, the hinge
pin brackets
2
and the screws
3
on the
bottom left side of the door.
12
On th
cap
1
and a pivot
2
. Remove them with
on the opposite side ( the cap goes on the
right and the pivot on the left).
3
3
13
Re move the decorative caps on the
bottom of the refrigerator housing. You will
need these holes for the bottom hinge.
Decorative Cap
9
Usin g a 13/32-in. or 10mm socket
wrench with a 2 in. (50 mm) extension and
a screwdriver, loosen the two bolts and the
screw, and remove the bottom hinge from
the right side.
Screw
Bolts
ENGLISH
To Next Page
Loading...
Need help?
General
