LG GX200 - Page 163

-163-
Item Function Selection Value Description
Main
LCD
Contrast
LEVEL1-15 0-255 To set the contrast of 15 levels
of Main LCD.
LEVEL 1 0-9999999 Voltage below LEVEL 1 powers off
automatically.
LEVEL 2 0-9999999
Voltage below LEVEL 2
prohibits MO calls.
LEVEL 3 0-9999999
Voltage below LEVEL 3 pops up
a warning screen.
LEVEL 4 0-9999999
Voltage below LEVEL 4
displays battery status icon with
0 level(empty).
LEVEL 5 0-9999999
Voltage below LEVEL 5
displays battery status icon with
1 level.
LEVEL 6 0-9999999
Voltage below LEVEL 5
displays battery status icon with
2 level.
LEVEL 7 0-9999999
Voltage above LEVEL 6
displays battery status icon with
3 level(full).
Battery
LEVEL 8-10 9999999
Reserved,should be 9999999.
Freq 1-5 0-255 Frequency of PWM for 5 levels.
PWM 1
Duty 1-5 0-100 Duty Cycle of PWM for 5 levels.
Freq 1-5 0-255 Frequency of PWM for 5 levels.
PWM 2
Duty 1-5 0-100 Duty Cycle of PWM for 5 levels.
Freq 1-5 0-255 Frequency of PWM for 5 levels.
PWM 3
Duty 1-5 0-100 Duty Cycle of PWM for 5 levels.
1. All settings are saved in NVRAM when the user presses LSK ok on the confirmation
screen “Update Parameters?”
1.4.7. Set UART
Change the UART setting for AT Command. If AT Command is set to UART1,then TST
2
is
set to UART2. If AT Command is set to UART2, then TST is set to UART1.
The UART POWER ON/OFF is for selection of UART1/2/3 on or off.
1.4.8. Sleep Mode
Enable or disable sleep mode.
1.4.9. DCM Mode
Enable or disable sleep mode.