-164-
1.4.10.PMIC 6318
To test the chip of PMIC 6318.
1.4.11.FM Radio
Item Function
Selection
Value Description
MONO Disable/Enable To Power on/off MONO
FM Radio
STEREO Disable/Enable To Power on/off STEREO
RSSI Level1~6 To set the signal level
If Count Delta 10,15,20,25,30
KHz
To set the frequency
increment value
RSSI Info. To display the signal
information
1.4.12.RTC XOSC(WO)
To set RTC frequency.
1.5. Audio
1.5.1. Normal Mode, LoudSp Mode, Headset Mode
Five types of audio settings can be set.
Item Function Selection Value Description
FIR
0-5 Set the 6 levels for
FIR
Speech 0-6 0-255 Set the 7 volume
levels for Speech
Key tone 0-6 0-255 Set the 7 volume
levels for Key tone
Melody 0-6 0-255 Set the 7 volume
levels for Melody
Sound 0-6 0-255 Set the 7 volume
levels for Sound
Microphone 0-6 0-255 Set the 7 volume
levels for
Microophone
Side tone Only one level 0-255 Set the gain of the
Side tone
1. The preset value is read from NVRAM when entering Normal Mode.
2. To change the volume,use the up and down keys.use LSK set to set the value(not
yet stored to NVRM).
3. On exiting Normal Mode, a confirmation screen “Update Parameter?”appears.
Pressing LSK yes stores the setting to NVRAM.Pressing RSK no discards all
changes and returns the user to the Audio screen.
4. Only the active volume level gain of the active mode is set to the hardware
To Next Page
Loading...
