14 Installation
Installation
3
3. Remove the WALL BRACKET INSTALL GUIDE.
4. Fix it with screws (not supplied) as shown in
the illustration below.
Step 4
5. Attach the unit bracket to the unit
with screws (supplied) as shown in the
illustration below.
Step 5
NOTE
Detach the unit from the bracket as shown below.
6. Remove the stand from the unit.
Step 6
7. Hang the main unit onto the brackets, as
shown below.
Step 7
CAUTION
• Do not hang onto the installed unit and avoid
any impact to the unit.
• Secure the unit rmly to the wall so that it does
not fall o. If the unit falls o, it may result in an
injury or damage to the product.
• When the unit is installed on a wall, please make
sure that a child does not pull any of connecting
cables, as it may cause it to fall.
HLT55W-F2_DSGPLL_ENG_9781.indd 14 2010-10-13 �� 5:57:10
To Next Page
Loading...
