What to do if my LG Speakers produce no sound?
If your LG Speakers aren't producing sound, first ensure the volume isn't set to the minimum. If it is, adjust the volume. Also, check if the mute function is activated and deactivate it by pressing the mute button or adjusting the volume. Finally, verify that the correct input source is selected.
What to do if my LG Speakers unit does not work properly?
If your LG Speakers unit isn't working correctly, try turning off the power to both the unit and any connected external devices like TVs, woofers, DVD players, or amplifiers, and then turn them back on. If that doesn't work, disconnect the power cord of the unit and all connected external devices, and then reconnect them.
Why is there no woofer sound from my LG Speakers?
If you're not getting any woofer sound from your LG Speakers, first check that the subwoofer is securely plugged into the wall outlet. If it is, the pairing between the unit and the subwoofer may be disconnected. In that case, you should connect the unit and the subwoofer.
What to do if LG Sound Sync is not working with my LG Speakers?
If LG Sound Sync is not working with your LG Speakers, first verify that your LG TV supports LG Sound Sync. Then, check the LG Sound Sync connection. Finally, check the sound settings on both your TV and the LG Speakers unit.
Why is my LG Speakers remote control not working?
If the remote control for your LG Speakers isn't working correctly, make sure you are within 7 meters of the unit. Remove any obstacles between the remote and the unit. If it still doesn't work, replace the batteries in the remote with new ones.
How to troubleshoot the AUTO POWER function on LG Speakers?
If the AUTO POWER function on your LG Speakers isn't working, check the connection of the external device such as a TV, DVD/Blu-Ray player, or Bluetooth device. Also, check the status of SIMPLINK and try turning it off. Note that depending on the connected device, this function may not operate.
How to fix LG Speakers Music Flow PC Software when it doesn’t work properly?
If the Music Flow PC Software isn't working correctly, disable all firewalls on your PC or Mac and try to connect again. Also, ensure that both the speaker and your PC or Mac are correctly connected to the local area network and can access the internet. The wireless communication may be interrupted from household devices that are using radio frequencies, so move the speaker and your PC or Mac away from them.
What to do if media servers are not displayed on the device list of my LG Speakers?
If media servers are not displayed on the device list of your LG Speakers, try turning off the firewall or anti-virus software running on your media server. Also, make sure that the speaker is connected to the same local area network as your media server.
General| Audio decoders | - |
|---|---|
| RMS rated power | 360 W |
| Audio output channels | 4.1 channels |
| Impedance | 4 Ω |
| Tweeter diameter | 13 mm |
| Soundbar speaker RMS power | 160 W |
| Signal-to-Noise Ratio (SNR) | 82 dB |
| Subwoofer included | Yes |
| Subwoofer sensitivity | 85 dB |
| Subwoofer connectivity | Wireless |
| Receiver included | No |
| Product color | Silver |
| Apple docking compatibility | Not supported |
| HDMI in | 1 |
| Bluetooth version | 4.0 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 78 W |
| Package depth | 223 mm |
| Package width | 1122 mm |
| Package height | 417 mm |
| Package weight | 11300 g |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 1060 mm |
| Height | 45 mm |
| Soundbar weight | 2500 g |
| Subwoofer depth | 261 mm |
| Subwoofer width | 171 mm |
| Subwoofer height | 390 mm |
| Subwoofer weight | 5600 g |
To Next Page
