LG HLT55W - Wireless Subwoofer ID Configuration

16 Installation
Installation
 3
Setting an ID of wireless subwoofer
When the unit is manufactured, the ID is
already set. If an interference occurs or you
use a new wireless subwoofer, an ID should be
set again.
1. Press HOME ( ).
2. Use
I
/
i
to select the [Setup] and
press ENTER ( ). The [Setup] menu appears.
3. Use
U
/
u
to select [AUDIO] option then
press
i
to move to the second level.
4. Use
U
/
u
to select the [Connecting
Speakers] option then press ENTER ( ) to
move to the third level.
The [Wireless Speaker Connection Guide]
appears.
5. Press PAIRING button on the subwoofer.
- If you see the blue LED indicator light,
pairing was successful.
6. Use
U
/
u
to select the [5.1 Speaker Setup]
and press ENTER ( ) for wireless speaker
connection test.
NOTE
• If you operate main unit then wireless subwoofer
(rear speakers) sound within a few seconds in
standby mode.
• Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
• Optimum performance can be implemented
only when the unit and the Wireless subwoofer
within distance of 2 m (6 ft.) to 10 m (32 ft.) is
used since communication failure may occur if
longer distance is used.
• It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer to
communicate with each other.
HLT55W-F2_DSGPLL_ENG_9781.indd 16 2010-10-13 �� 5:57:10