To Next PageTo Next PageWhat to do if my LG Receiver remote control is not working?
If your LG Receiver remote control isn't working, try these steps: * Make sure you're pointing the remote at the receiver's remote sensor. * Ensure you're within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Replace the batteries in the remote with new ones.
Why is there no sound from my LG Receiver, or is it very low?
If you're experiencing no sound or very low sound from your LG Receiver, consider the following: * Ensure the equipment connected with the audio cable is set to receive DVD audio signal output. Select the correct input mode of the receiver. * Check that the audio cables are securely connected. * Verify that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it.
Why is there no picture on my LG Receiver?
There might be several reasons why you're not seeing a picture on your LG Receiver. First, ensure your TV is set to the correct video input mode to receive the signal from the DVD/CD Receiver. Second, check that the video cable is securely connected to the jacks. Finally, verify that your TV is turned on.
How to fix poor playback picture on LG HT302SD?
If the playback picture on your LG Receiver is poor, try the following: * Clean the disc. * Insert a disc, if none is inserted. * Ensure you're using a playable disc. * Place the disc with the playback side down. * Make sure the disc is placed correctly within the guide on the disc tray. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
How to stop loud hum or noise from LG Receiver?
To address a loud hum or noise from your LG Receiver: * Clean the disc. * Ensure the speakers and components are securely connected. * Move your TV away from the audio components.
What to do if the DVD/CD indicator does not work on my LG HT302SD Receiver?
If the power is on, but the DVD/CD Receiver audio CD indicator does not work, insert a disc.
General| Equalizer | Yes |
|---|---|
| RMS rated power | 300 W |
| Audio output channels | 5.1 channels |
| Audio formats supported | MP3, WMA |
| FM band range | 87.5 - 108 MHz |
| Disc types supported | CD-R, CD-RW, DVD-R |
| Optical disc player type | DVD recorder |
| USB version | 2.0 |
| Component video (YPbPr/YCbCr) out | 1 |
Alerts regarding electric shock, fire hazards, and laser product safety.
Guidelines for safe use of the power cord and general environmental precautions.
Describes the function of each button on the remote control.
Guides on connecting the receiver to a TV via SCART or Component Video.
Connecting VCRs and USB devices like memory sticks.
Instructions for wiring speakers and setting parameters for surround sound.
Enabling progressive scan for better video quality and important usage notes.
Detailed setup for speaker size, volume, distance, and test signals.
Setting up parental controls for DVD playback and password management.
Instructions for playing audio CDs and MP3/WMA files.
Steps to play DivX movies and navigate folders.
How to preset and store FM/AM radio stations.
Methods for tuning preset/non-preset stations and improving reception.
Solutions for problems related to power, picture display, and audio output.
Troubleshooting disc playback, disc errors, and poor picture quality.
Resolving problems with radio reception and remote control operation.
