18
WATCHING PROJECTOR
Using Additional
Options
Adjusting Aspect Ratio
Resize an image to view at its optimal
size by pressing RATIO while you are
watching projector.
NOTE
y
Some options may not be
available depending on input
signals.
y
You can also change the image
size by pressing
Q.MENU
or
MENU
.
- FULL: Changes to the full screen
regardless of the aspect ratio.
- 16:9: Resizes images to fit the
screen width.
- Just Scan: Displays video images in
the original size without cutting off
the edges.
NOTE
y
If you select
Just Scan
, you may
see image noises at the edge or
edges of the screen.
- Set By Program: Displays images
in the same aspect ratio as the
original image.
- 4:3: Resizes images to the previous
standard.
- Zoom: Enlarges an image to fit the
screen width. The top and bottom
of the image may not appear.
y
Adjust proportion of Zoom, press
or
.
y
Move the image on the screen,
press
or
.
- Cinema Zoom: Formats an image
to the cinemascope ratio, 2.35:1.
y
To change the ratio of the cinema
zoom, press
or
and its range
is from 1 to 16.
y
To move the zoom focus up or
down, press
or
.
NOTE
y
If you enlarge or reduce an image,
the image may be distorted.
To Next Page
Loading...
Need help?
General
