To Next PageTo Next PageWhy is my LG Air Conditioner not cooling effectively?
There might be several reasons why your LG Air Conditioner isn't cooling or heating effectively. Ensure the air filter is clean by following the air filter cleaning instructions. Also, verify that the temperature is set correctly and that the air inlet or outlet vents of the indoor unit are not obstructed.
What to do if my LG K12AH Air Conditioner is leaking condensation?
If condensation is leaking from your LG air conditioner, check that the drain hose is tightly connected. Also, ensure the indoor unit is installed evenly.
Why is my LG Air Conditioner so noisy?
The noise from your LG Air Conditioner could be due to a couple of reasons: if it sounds like water flowing, it's the refrigerant circulating inside the unit. If it sounds like compressed air releasing, it's the dehumidifying water being processed.
Why LG Air Conditioner does not operate for 3 minutes after turning on?
The delay in operation of your LG Air Conditioner after turning it on is due to a protective mechanism. It protects the compressor from frequent on/off cycles. Wait about 3 minutes, and the operation will begin.
What to do if my LG K12AH Air Conditioner does not operate?
If your LG Air Conditioner isn't operating, first check the room temperature setting. Then, check if the circuit breaker is on.
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Type | Split |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Outdoor) | 52 dB |
Critical safety instructions for the installation process, covering electrical and physical placement.
Rules for operating the unit safely and preventing hazards, including child safety.
Importance of grounding, and warnings against using adapters.
Guidelines for using extension cords safely and correctly.
Explains the purpose of each button on the remote control.
How to select different operating modes like Cooling, Auto, Heating.
How to adjust the desired temperature for cooling mode.
How the unit automatically switches modes to maintain temperature.
How to use the dehumidification function for comfort.
How to adjust the desired temperature for heating mode.
How to remove and clean the air filters regularly.
Checks for when the air conditioner does not turn on.
What to check if cooling or heating is not effective.
