Changing your bluetooth
settings:
1 Touch and choose .
2 Choose then touch and
choose Settings.
Make your changes to:
My device visibility - Choose to
be Visible or Hidden or Visible
for 1 min.
My device name - Enter a name
for your KP501.
Supported services - Choose
how to use Bluetooth in
association with different services.
Remote SIM Mode - Turn on
or off.
My address - Show your
Bluetooth address.
Pairing with another
Bluetooth device
By pairing your KP501 and another
device, you can set up a passcode
protected connection. This means
your pairing is more secure.
1 Check your Bluetooth is On and
Visible. You can change your
visibility in the Settings menu.
2 Touch Search.
3 Your KP501 will search for devices.
When the search is completed
Retry will appear on screen.
4 Choose the device you want to
pair with and enter the passcode,
then touch OK.
5 Your phone will then connect to
the other device, on which you
should enter the same passcode.
6 Your passcode protected
Bluetooth connection is now
ready.
To Next Page
Loading...
