Why does my LG L19NT say "CHECK SIGNAL CABLE"?
If your LG Monitor displays a "CHECK SIGNAL CABLE" message, it means the signal cable between your PC and the display is not connected. Check the signal cable and try again.
Why is my LG L19NT screen blinking?
If your LG Monitor screen is blinking, it may be set to interlace mode; change it to the recommended resolution. Also, ensure the power voltage is high enough, specifically higher than AC100-240V 50/60Hz.
What does "OUT OF RANGE" mean on my LG Monitor?
If you see an "OUT OF RANGE" message on your LG Monitor, it means the signal from the PC (video card) is out of the horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
How to fix an LG L19NT when no image appears?
If no image appears on your LG Monitor, ensure the power cord is properly connected to the outlet and that the monitor is turned on by pressing the Power button. Also, adjust the brightness and contrast settings. If the display is in power saving mode, try moving the mouse or pressing a key on the keyboard. Finally, make sure your PC is turned on.
What to do if the screen color on my LG Monitor is mono or abnormal?
If the screen color on your LG Monitor is mono or abnormal, first check if the signal cable is properly connected, tightening it with a screwdriver if necessary. Next, ensure the video card is correctly inserted in its slot. Finally, set the color setting to higher than 24 bits (true color) in Control Panel - Settings.
How to correct an incorrect display image on my LG Monitor?
To correct an incorrect display image on your LG Monitor, first press the AUTO/SET button to automatically adjust the display image to the ideal setting. If needed, adjust the image position using the H position and V position icons in the on-screen display. Also, check Control Panel --> Display --> Settings and readjust the video card to the recommended resolution if the frequency or resolution were changed.
How do I fix horizontal noise on my LG L19NT?
To fix horizontal noise or unclear characters on your LG Monitor, first press the AUTO/SET button to automatically adjust your display image to the ideal setting. You can also decrease the horizontal bars using the PHASE icon in the on-screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting.
How to remove vertical bars or stripes on my LG L19NT screen?
To remove vertical bars or stripes on your LG Monitor screen, first press the AUTO/SET button to automatically adjust your display image to the ideal setting. If that doesn't work, decrease the vertical bars or stripes using the CLOCK icon in the on-screen display.
How to unlock OSD on LG L19NT Monitor?
To unlock the OSD controls on your LG Monitor when you see an "OSD LOCKED" message, push the MENU button for several seconds until the message “OSD UNLOCKED” appears.
General| Screen Size | 19 inches |
|---|---|
| Native Resolution | 1280 x 1024 |
| Interface | Analog |
| Aspect Ratio | 5:4 |
| Panel Type | TN |
| Viewing Angle | 160° (horizontal), 160° (vertical) |
To Next Page
