A14
ENGLISH
Select an input signal.
Press the SOURCE button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
•
Select Component 1.
Connect the video/audio cable as shown in the below figure and then, connect the
power cord (See page A11).
Monitor
HDTV Receiver
Red
Red
Blue
Green
White
Red
Red
Blue
Green
White
Audio Cable
(not included)
Component Cable
(not included)
•
Connect the input terminal with a proper color match.
Connecting the HDTV(720p/1080i)
To Next Page
Loading...
