A15
Select an input signal.
Press the SOURCE button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
•
Select Component 2.
Connecting to External Devices
Connect the video/audio cable as shown in the below figure and then, connect the
power cord (See page A11).
Monitor
DVD Receiver
Red
Red
Blue
Green
White
Red
Red
Blue
Green
White
Audio Cable
(not included)
Component Cable
(not included)
•
Connect the input terminal with a proper color match.
Connecting the DVD(480i)
To Next Page
Loading...
