LG L3200TF - Connecting the VCR; DVD

A13
Connecting to External Devices
When connecting with an RCA cable.
•
Select AV.
When connecting with an S-Video cable.
• Select S-Video.
Select an input signal.
Press the SOURCE button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
B
A
When connecting with a S-Video cable.
•
Connect to the S-Video input terminal to watch high image quality movies.
Connect the video cable as shown in the below figure and then connect the power
cord (See page A11).
B
When connecting with a RCA cable.
• Connect the input terminal with a proper color match.
(Video – Yellow, Sound (left) – White, Sound (right) – Red)
A
RCA Cable
(not included)
Red
White
Yellow
R
W
Y
Monitor
VCR/DVD Receiver
S-Video Cable
(not included)
Connecting the VCR / DVD