18
Troubleshooting
Symptom
Power doesn’t turn on.
The unit doesn’t
operate.
Playback is not
possible.
No sound is heard.
The volume level will
not rise.
There’s no sound.
There’s audio skipping.
Correction
Confirm once more that all connections are correct.
Rectify the problem that caused the fuse to blow, and
then replace it. Be very sure to install the correct fuse
with the same rate.
Turn the unit off and then on.
Clean disc.
Check what type the disc is.
Connect the cables correctly.
Adjust the volume.
Secure this unit firmly.
Cause
Leads and connectors are not properly
connected.
The fuse is blown.
Noise and other factors are causing the built-in
microprocessor to operate incorrectly.
The disc is dirty.
The loaded disc is of a type this unit cannot play.
Cables are not connected correctly.
The volume level is low.
This unit is not firmly secured.
To Next Page
Loading...
Need help?
General
