Operating12
Operating
3
Using an USB
device (LCS320UB/
LCS321UB only)
1. Open the USB cover.
2. Connect the USB device.
3. Press SRC repeatedly to select a source
to USB.
Moving to another drive
When connecting this unit to
multi reader,
press BAND on the unit (or DRV on remote
control) to go the next drive. Each time
you press the button, the driver modes
change.
Quick search of a desired file
1. Press the volume knob on the unit.
Or press ENTER on the remote control.
2. Rotate the volume knob on the unit
to select a desired ROOT or folder and
press it.
Or press
w
/
s
and press ENTER on the
remote control.
3. Rotate the volume knob on the unit to
select a desired track / file and press it.
Or press
w
/
s
and press ENTER on the
remote control.
Other functions are same with
"Listening to a CD". Refer to page 9 to
10.
,
Note
Playable USB device
Requirement
Do not extract the USB device during
operation (play, etc.).
An USB device which requires additional
programme installation when you
have connected it to a computer, is not
supported.
Regular back up is recommended to
prevent data loss.
If you use a USB extension cable, USB
HUB, USB Multi-reader, or external HDD,
the USB device may not be recognized.
When you connect a partitioned USB
device into the unit, only the rst
partition is recognized on it.
Some USB device may not work with
this unit.
Digital camera and mobile phone are
not supported.
USB Port of the unit cannot be
connected to PC. The unit cannot be
used as a storage device.
Using NTFS le system is not supported.
(Only FAT (16 / 32) le system is
supported.)
To Next Page
Loading...
Need help?
General
