Before sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
Slide the dishwasher into the cabinet
opening carefully. Make sure that the drain
hose inside the cabinet is not kinked or
stretched.
1
2
Step 3 :
PREPARE DISHWASHER FOR
INSTALLATION
Lay the dishwasher on its back.
Adjust the legs to the needed height of
cabinet as shown in below figure.
1
2
INSTALLATION INSTRUCTION
Step 4 :
INSTALL THE DISHWASHER IN
CUPBOARD
CAUTION
If the height of cupboard is below 850mm,
you should remove the top table by
unscrewing the 2 screws. (Two of rear)
6
To Next Page
Loading...
