To Next PageTo Next PageWhat to do if my LG LD-1419M2 displays the "OE" code and water is not pumped away?
If your LG Dishwasher displays the "OE" code, indicating that water is not being pumped away, the drain hose might be kinked, so try straightening it. Also, the filter could be clogged, so clean the filter. If the problem persists, it may be a motor issue, and you should call for service.
Why won't my LG LD-1419M2 start?
Your LG Dishwasher might not start because the door isn't fully closed. Make sure to close the door properly. Another reason could be that the start button hasn't been pressed, so press the start button to begin the cycle.
What to do if my LG Dishwasher displays the "IE" code?
If your LG Dishwasher displays the "IE" code, it means water is not being supplied. Check the water tap to ensure it is open. If you can not solve the problem, call for service.
What to do if my LG Dishwasher displays the "EI" code?
If your LG Dishwasher displays the "EI" code, which indicates that the drain pump is automatically operating, it could be due to a water leak from the hose connections. In this case, close the water tap and unplug the power plug. If the issue persists, it may indicate damage to the unit caused by a water leak, and you should call for service.
How to fix LG Dishwasher spray arms that don't rotate smoothly?
If the spray arms in your LG Dishwasher aren't rotating smoothly, it's likely that food particles are blocking their mounting. Clean the holes of the spray arm to resolve this issue.
Why does my LG LD-1419M2 leave white deposits after washing?
If your LG Dishwasher leaves white deposits after washing, the amount of detergent or rinse-aid may be set incorrectly. Inspect and adjust the detergent or rinse-aid settings.
What to do if no lights come on when my LG LD-1419M2 is turned on?
If no lights come on when you turn on your LG Dishwasher, first check that the plug is properly inserted into the socket. Also, check the electricity supply, as fuses may have blown or the circuit breaker may have tripped. If the electricity of the house was cut off, call for service.
Why are there streaks on glassware after using my LG LD-1419M2?
If streaks are left on glassware after washing in your LG Dishwasher, it could be due to too little rinse-aid being dispensed. Try filling the rinse-aid dispenser and adjusting the level of rinse-aid container.
General| Brand | LG |
|---|---|
| Model | LD-1419M2 |
| Category | Dishwasher |
| Language | English |
General safety precautions for using the dishwasher, including installation and operational guidelines.
Essential information on proper grounding for electrical safety to reduce shock risk.
Guidelines for preparing the installation space and dimensions for the dishwasher.
Instructions for electrical connections and safety precautions during installation.
Steps for adjusting the dishwasher's legs to the required height before installation.
Procedure for carefully sliding the dishwasher into the cabinet opening.
How to correctly connect the dishwasher's drain hose to prevent siphoning.
Guide for connecting the water supply hose to the water tap.
Final checks and assembly procedures before initial operation.
Instructions on leveling the appliance for proper door function.
Explains the meaning of indicator lights for program phases.
Details on activating the 'Strong' wash action for tougher cleaning.
Indicates when rinse aid needs to be refilled for optimal drying.
How to use the half load option to save energy for smaller loads.
Explains indicator lights for child lock and extra hot settings.
Information on the display showing program time and error codes.
General guidelines for loading items for better washing performance.
Specific instructions for loading plates, pots, and pans into the lower rack.
Proper placement of cutlery within the basket to prevent nesting.
Specific instructions for loading delicate items like cups and glasses.
How to raise or lower the upper rack to accommodate different crockery sizes.
Instructions on where and how to add detergent before starting a program.
Advice on using 3-in-1 detergent products and their potential impact.
Guidance on when and how to refill the rinse aid chamber.
Tips and options to improve drying performance after the wash cycle.
Details on the specifications and procedures for the energy test.
The initial step to turn on the dishwasher and start the sequence.
Verifying the rinse aid level is sufficient before commencing a cycle.
Instructions for checking and cleaning the dishwasher filters.
Proper procedures for loading dishes and cutlery into the racks.
Checking that spray arm rotation is unobstructed by loaded items.
Adding the correct amount of detergent into the dispenser.
Selecting a wash program and initiating the cycle.
What happens when the wash cycle is complete and the unit shuts off.
Details of the Dual Intensity wash program for mixed loads.
Explanation of the Auto Wash program that adjusts based on soil level.
How the dishwasher restarts automatically after a power interruption.
Information on the energy-efficient Eco 50 program.
Description of the program designed for delicate items like glasses.
Details on the Quick wash program for lightly soiled items.
Instructions for removing, cleaning, and reassembling the dishwasher filters.
How to check and clean the lower spray arm for optimal performance.
How to check and clean the upper spray arm by removing it.
Solutions for issues where the dishwasher shows no power.
Solutions for problems preventing the dishwasher from starting.
Solutions for issues with the spray arms not rotating correctly.
Solutions for white residue or deposits on dishes after a wash cycle.
Solutions for streaks or water marks on glassware.
Solutions for poor drying performance of dishes.
Solutions for general unsatisfactory washing outcomes.
Troubleshooting 'OE' error code, indicating water is not pumped away.
Troubleshooting 'IE' error code, indicating water is not supplied.
Troubleshooting 'EI' error code, related to automatic drain pump operation.
Troubleshooting 'FE' error code, related to excessive water supply.
Troubleshooting 'HE' error code, related to the water heater circuit.
Troubleshooting 'tE' error code, related to thermistor or high inlet temperature.
Troubleshooting 'LE' error code, indicating a motor issue.
Troubleshooting 'CE' error code, indicating a motor issue.
Troubleshooting 'PF' code, indicating a power failure during operation.
Troubleshooting 'Cd' code, indicating the Cool-Dry function.
Troubleshooting 'CL' code, indicating the Child-Lock function.
Troubleshooting 'F' code, indicating water clarity sensing.
Troubleshooting delay start number display.
