What to do if my LG LD-1419W2 Dishwasher displays the "OE" code and water is not pumped away?
If your LG Dishwasher displays the "OE" code, indicating that water is not being pumped away, the drain hose might be kinked, so try straightening it. Also, the filter could be clogged, so clean the filter. If the problem persists, it may be a motor issue, and you should call for service.
Why won't my LG LD-1419W2 start?
Your LG Dishwasher might not start because the door isn't fully closed. Make sure to close the door properly. Another reason could be that the start button hasn't been pressed, so press the start button to begin the cycle.
What to do if my LG LD-1419W2 displays the "IE" code?
If your LG Dishwasher displays the "IE" code, it means water is not being supplied. Check the water tap to ensure it is open. If you can not solve the problem, call for service.
What to do if my LG LD-1419W2 displays the "EI" code?
If your LG Dishwasher displays the "EI" code, which indicates that the drain pump is automatically operating, it could be due to a water leak from the hose connections. In this case, close the water tap and unplug the power plug. If the issue persists, it may indicate damage to the unit caused by a water leak, and you should call for service.
How to fix LG LD-1419W2 Dishwasher spray arms that don't rotate smoothly?
If the spray arms in your LG Dishwasher aren't rotating smoothly, it's likely that food particles are blocking their mounting. Clean the holes of the spray arm to resolve this issue.
Why does my LG LD-1419W2 leave white deposits after washing?
If your LG Dishwasher leaves white deposits after washing, the amount of detergent or rinse-aid may be set incorrectly. Inspect and adjust the detergent or rinse-aid settings.
What to do if no lights come on when my LG Dishwasher is turned on?
If no lights come on when you turn on your LG Dishwasher, first check that the plug is properly inserted into the socket. Also, check the electricity supply, as fuses may have blown or the circuit breaker may have tripped. If the electricity of the house was cut off, call for service.
Why are there streaks on glassware after using my LG Dishwasher?
If streaks are left on glassware after washing in your LG Dishwasher, it could be due to too little rinse-aid being dispensed. Try filling the rinse-aid dispenser and adjusting the level of rinse-aid container.
Covers essential precautions for safe operation and user protection.
Guidelines for safe electrical and plumbing connections during installation.
Precautions to ensure safe operation and prevent damage during use.
Measures to protect children from dishwasher hazards and misuse.
Instructions on safe power cord handling and electrical grounding for user safety.
Details electrical connection requirements, safety, and code compliance.
Instructions for connecting the dishwasher drain hose to plumbing or standpipe.
Steps for connecting the water inlet hose to the tap, including hot/cold water options.
Instructions for removing, cleaning, and reassembling dishwasher filters.
Guidance on checking and cleaning the lower and upper spray arms.
Table of common issues, their possible causes, and recommended solutions.
Explanation of error codes displayed and troubleshooting steps.
General| Type | Built-In |
|---|---|
| Number of Place Settings | 14 |
| Control Type | Electronic |
| Color | White |
| Size | 24-inch |
To Next Page
