To Next PageTo Next PageWhat to do if my LG Dishwasher displays the "OE" code and water is not pumped away?
If your LG Dishwasher displays the "OE" code, indicating that water is not being pumped away, the drain hose might be kinked, so try straightening it. Also, the filter could be clogged, so clean the filter. If the problem persists, it may be a motor issue, and you should call for service.
Why won't my LG LD-1419T2 start?
Your LG Dishwasher might not start because the door isn't fully closed. Make sure to close the door properly. Another reason could be that the start button hasn't been pressed, so press the start button to begin the cycle.
What to do if my LG Dishwasher displays DRAIN ERROR?
If your LG Dishwasher displays a DRAIN ERROR, it could be due to several reasons. The filter might be clogged, so try cleaning it. Alternatively, the drain hose could be kinked or blocked; in this case, remove whatever is causing the kink or blockage. If neither of these solutions works, the drain pump/motor or its circuit may be faulty, requiring you to replace the drain pump/motor or repair the circuit.
What to do if my LG Dishwasher displays the "IE" code?
If your LG Dishwasher displays the "IE" code, it means water is not being supplied. Check the water tap to ensure it is open. If you can not solve the problem, call for service.
What to do if my LG Dishwasher displays the "EI" code?
If your LG Dishwasher displays the "EI" code, which indicates that the drain pump is automatically operating, it could be due to a water leak from the hose connections. In this case, close the water tap and unplug the power plug. If the issue persists, it may indicate damage to the unit caused by a water leak, and you should call for service.
How to fix LG Dishwasher spray arms that don't rotate smoothly?
If the spray arms in your LG Dishwasher aren't rotating smoothly, it's likely that food particles are blocking their mounting. Clean the holes of the spray arm to resolve this issue.
Why does my LG LD-1419T2 Dishwasher leave white deposits after washing?
If your LG Dishwasher leaves white deposits after washing, the amount of detergent or rinse-aid may be set incorrectly. Inspect and adjust the detergent or rinse-aid settings.
What to do if no lights come on when my LG LD-1419T2 Dishwasher is turned on?
If no lights come on when you turn on your LG Dishwasher, first check that the plug is properly inserted into the socket. Also, check the electricity supply, as fuses may have blown or the circuit breaker may have tripped. If the electricity of the house was cut off, call for service.
How to fix INLET ERROR on my LG Dishwasher?
If your LG Dishwasher displays an INLET ERROR, there are several potential causes. First, make sure the water tap is fully opened. If it is, check the inlet hose for any kinks and repair them. Another possibility is that the filter of the inlet valve is clogged by impure water; in this case, close the water tap, unscrew the inlet hose (at the inlet valve side), and clean the filter. If the inlet water valve itself might be faulty, consider replacing or repairing it. Also, verify that the water pressure isn't too low (below 0.5 kgf/). Finally, the inlet valve could be blocked by a safety device due to leakage sensing; if this is the case, check for damages, repair or replace the related parts, and disconnect the inlet hose to the dishwasher to unlock the safety valve.
Why does my LG Dishwasher display LEAKAGE ERROR?
If your LG Dishwasher shows a LEAKAGE ERROR, it could be due to a few reasons. There might be water leakage in the hose connections, in which case you should replace the hose connections. Water could also be leaking due to damage; inspect for any damage and repair or replace the affected parts. Additionally, the impeller of the washing pump might be worn away, requiring you to replace the washing pump. Lastly, the thermal protector of the washing motor could be activated, so check the applied voltage.
General| Brand | LG |
|---|---|
| Model | LD-1419T2 |
| Category | Dishwasher |
| Language | English |
Crucial safety guidelines for operating the dishwasher.
Safety precautions to follow during the installation process.
Safety measures to observe while using the dishwasher.
Guidelines to ensure the safety of children around the appliance.
Specific warnings and recommendations regarding the power cord.
Essential information and procedures for proper grounding.
Instructions for preparing the cabinet space for dishwasher installation.
Guidelines for safely connecting the dishwasher's electrical wiring.
Steps to prepare the dishwasher unit itself before placing it.
Procedures for fitting the dishwasher into the designated cupboard space.
Instructions for correctly connecting the dishwasher's drain hose.
Steps for connecting the dishwasher to the water supply.
Final checks and assembly steps after installation.
Guidance on how to properly level the dishwasher for optimal performance.
Instructions on how to fill the rinse aid dispenser.
Guidelines for properly loading the dishwasher for effective cleaning.
Specific instructions for loading items into the lower rack.
Guidance on how to correctly load cutlery into the basket.
Specific instructions for loading items into the upper rack.
How to raise or lower the upper rack to accommodate different dish sizes.
Instructions for adding the correct amount of detergent for washing.
Information on when and how to refill the rinse aid dispenser.
Tips and options for improving the drying performance of the dishwasher.
Details about energy efficiency testing and specifications.
Instructions for cleaning and maintaining the dishwasher filters.
Guidance on cleaning the lower spray arm.
Guidance on cleaning the upper spray arm.
