What to do if my LG LD-1426T Dishwasher shows a DRAIN ERROR?
If your LG Dishwasher is displaying a DRAIN ERROR, here's what might be happening: * The filter could be clogged. Try cleaning the filter. * The drain hose might be kinked or blocked. Remove any kinks or blockages from the drain hose. * The drain pump/motor or its circuit may be faulty. In this case, you may need to replace the drain pump/motor or repair the circuit.
How to fix a LEAKAGE ERROR on my LG LD-1426T?
If your LG Dishwasher displays a LEAKAGE ERROR, it could be due to: * Water leakage in hose connections. Replace the hose connections. * Water leaking due to damages. Check for damages and repair or replace the related parts. * Worn impeller of the washing pump. Replace the washing pump. * The thermal protector of the washing motor has activated. Check the applied voltage.
Why is my LG LD-1426T showing an INLET ERROR?
If your LG Dishwasher displays an INLET ERROR, it could be due to several reasons: * The water tap might not be open. Ensure the water tap is fully opened. * The inlet hose may be kinked. Check the inlet hose and repair any kinks. * The filter of the inlet valve might be clogged. Close the water tap, unscrew the inlet hose at the inlet valve side, and clean the filter. * The inlet water valve may be faulty. Consider replacing or repairing the inlet valve. * Low water pressure (below 0.5 kgf/). Check the water remains on the base. * Inlet valve blocked by safety device. Check for damages and repair/replace parts. Disconnect the inlet hose to unlock the safety valve.
What causes a HEATER ERROR on an LG LD-1426T Dishwasher?
If your LG Dishwasher displays a HEATER ERROR, possible causes include: * A problem with the heater circuit. In this case, repair the heater circuit. * A faulty thermistor. Replace the thermistor. * A shorted heater. Replace the heater. * A problem with the relay circuit. Repair the relay circuit.
Why does my LG LD-1426T show an EXCESS ERROR?
If your LG Dishwasher is displaying an EXCESS ERROR, it could be due to: * A problem with the inlet valve. Replace the inlet valve. * A problem with the air break. Replace the air breaker. * A problem with the sensor assembly. Replace the sensor assembly. * A problem with the controller. Repair or replace the controller.
What does a THERMAL ERROR mean on my LG LD-1426T Dishwasher?
If your LG Dishwasher displays a THERMAL ERROR, the following could be the reason: * The circuit of the thermistor is troubled. Repair the circuit of the thermistor. * The thermistor is troubled. Replace the thermistor. * The controller is troubled. Repair or replace the controller.
General| Brand | LG |
|---|---|
| Model | LD-1426T |
| Category | Dishwasher |
| Language | English |
To Next Page
