LG LD-12AS1 - Page 13

13
HOW TO USE
AND
OPERATE
7.
Adding
Rinse Aid
Dispenser
To fill the Rinse Aid
chamber,
rotate the
round
cap
counter
clockwise
and
remove.
Fill the container to the maximum
level
with
a
good quality
Rinse
Aid,
then
replace
and lock the
cap.
The Rinse Aid is
automatically dispensed
during
the final rinse
cycle.
Depending
on the
dosage setting
and the
number of
washes,
the chamber
may
need
only
to be
topped up
once
per
month. The
rinse aid
level
can be checked
by looking
at
the indicator
window when
the
dishwasher
door is
fully open.
Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid
required
The
dosage setting
is
factory
set to suit
most installations.
If,
after
washing, you
notice
cloudy spots,
streaks or
water
marks
on
your glassware,
it
may
be
necessary
increase the
setting.
To do
so,
remove
the
cap
and rotate the indicator
arrow
to a
higher setting
then
replace
the
cap
. If the
glasses
are smeared or there is foam
present
on the bottom of the
glass
or the bottom of
the machine.
Select
a
lower
setting.
Rinse-Aid
Indicator
Adjust
Lever
(Rinse)
Rinse Aid Information
Rinse Aid is
necessary
in order to
get spot
and streak free dishes as
well
as
improved
drying. Using
the correct amount
will
improve
wash
performance.
However,
using
too much can
produce
excess foam
leading
to
possible
water
leaks.