- 15 -
3) Fan
① Open the door.
② Remove the air duct.
③ Remove the wire connections.
④ Remove the outer cover by removing 1
screw.
⑤ Remove 2 fixing screws inside and turn
the Inner Cover counterclockwise.
4) Detergent Dispenser
① Close the door.
② Remove the wire connections.
③ Remove 6 screws with brackets.
Detergent
Dispenser
Door Liner
Door Bracket
Inner
Cover
Air Duct
Out
Cover
Fan
Door Liner Assembly
Hinge supporter
②
①
5) Door Spring (Right & Left)
① Push the Spring upwards and take it off
from the Frame.
Be careful not to be injured by the sharp
edge of Tub.
② Take the Hinge Link off from the Hinge.
6) Door Liner
① Open the door.
② Pull the Door Liner and take it off from
the Hinge Supporter.
3828DD3007H(S/M) 2008.2.18 4:25 PM 페이지15 001 GateRip_A3
To Next Page
Loading...
