- 18 -
10. C-Base Assembly
1) synchronous motor
① Remove the 2 screws.
② Lift the cam upward.
※ Be careful not to install upside down.
(part number on the cam should face the
motor.)
2) Vario valve
① Remove 4 screws and lift the cover
upward.
② Lift the vario valve upward.
3) Capacitor
① Remove 1 screw.
4) Power cord assembly
① Turn the power cord assembly 90º and
take it off.
3828DD3007H(S/M) 2008.2.18 4:25 PM 페이지18 001 GateRip_A3
To Next Page
Loading...
