2
INTRODUCTION
Service
You will need the following information when
activating service:
•
Your name, address and an eight-digit
number that you will use to access your
account (your personal identification number
“PIN”).
•
Your serial number (IMEI) and SIM card
number. To locate the serial number, remove
the phone from the box and remove the
battery cover from the phone. The serial
number is located near the bar code. It will be
either 14 or 18 digits. The SIM card number
can be located below the bottom bar code
on the back of the SIM card holder.
•
If your phone does not have a removable
battery, check the box label or phone
settings to locate the serial number.
•
Your choice of MetroPCS plan and services
including unlimited data, talk and text plans.
•
Install the battery, if applicable, and SIM card
in your new phone by following the step by
step instructions in this phone’s User Guide.
•
Once your phone is powered up, dial
1.888.8metro8 (1.888.863.8768) to connect
with an activation representative who will
assist you in activating your phone. You can
also activate your phone online by visiting
metropcs.com. (As soon as your service is
activated, be sure to fully charge the phone’s
battery before using it again.)
Don’t hesitate to ask your MetroPCS
representative for more information on additional
features and services or visit metropcs.com.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
