4. TROUBLE SHOOTING
- 144 -
Copyright © 2012 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4.15 Gyro Sensor troubleshooting
When the Gyro sensor does not work, the reason is chip problem. If the Gyro sensor IC is damaged, it will do not work
even thought power is supplied and APQ8064 controls normally. Therefore if the Gyro sensor is damaged, change the
Gyro sensor IC or main board.
Change the Gyro Sensor
IC(U8002)
START
Yes
Yes
Yes
Function is OK?
Function is OK?
Change the main board
Gyro function is OK?
Check the gyro
sensor function
END
END
END
No
No
To Next Page
Loading...
