What to do if the audio CD indicator on my LG Home Theater System DVD/CD Receiver does not work?
If the audio CD indicator isn't working, it might be because no disc is inserted. Try inserting a disc.
What to do if my LG Home Theater System remote control is not working?
If the remote control for your LG Home Theater System isn't working, ensure it's pointed directly at the remote sensor on the DVD/CD Receiver and that you are within 23 ft (7 m). Remove any obstacles between the remote and the receiver. If it still doesn't work, replace the batteries with new ones.
What to do if the remote control for my LG LH-T2020 isn't working?
If the remote control for your LG Home Theater System isn't working properly, try the following: * Make sure the remote is pointed at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles between the remote and the receiver. * Replace the batteries in the remote with new ones.
What to do if the remote control for my LG Home Theater System doesn't work properly?
If the remote isn't working, try these steps: First, make sure you're pointing the remote directly at the remote sensor on the DVD/CD Receiver. Second, ensure you're within about 23 ft (7 m) of the receiver. Third, check for any obstacles between the remote and the receiver and remove them. Finally, replace the batteries with new ones.
Why is there no picture on my LG LH-T2020 Home Theater System?
If there is no picture on your LG Home Theater System, several things could be the cause. First, ensure your TV is set to the correct video input mode to receive the DVD signal. Second, check that the video cable is securely connected to the jacks. Finally, verify that the connected TV is powered on.
What to do if the audio CD indicator doesn't work on my LG LH-T2020?
If the power is on but the DVD/CD Receiver audio CD indicator in the DVD display of your LG Home Theater System does not work, it is possible that no disc is inserted. Insert a disc.
Why can't I tune into radio stations on my LG LH-T2020?
If you can't tune into radio stations on your LG Home Theater System, ensure the antenna is securely connected. If tuning with automatic tuning fails, try tuning in the station manually. If tuning by scanning preset stations doesn't work, you may need to preset the stations.
What to do if the playback picture quality is poor on my LG LH-T2020 Home Theater System?
If the playback picture quality on your LG Home Theater System is poor, try the following: * Clean the disc if it's dirty. * Insert a disc if none is inserted. * Ensure you are using a playable disc. * Place the disc with the playback side down. * Make sure the disc is placed correctly within the guide on the disc tray. * Press the SETUP button to turn off the menu screen if it's on. * Cancel the Rating function or change the rating level if it's set.
How to fix a poor playback picture on my LG LH-T2020?
A poor playback picture can be caused by several things. Here's what to check: * Clean the disc if it's dirty. * Make sure a disc is inserted. * Ensure you're using a playable disc. * Place the disc with the playback side down. * Make sure the disc is placed correctly inside the guide on the disc tray. * If a menu is on the screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
How to stop loud humming or noise from LG Home Theater System?
If you hear a loud hum or noise from your LG Home Theater System, check these: * Clean the disc, as it may be dirty. * Ensure the speakers and components are securely connected. * Move the TV away from the audio components, as the DVD/CD Receiver may be too close to the TV.
General| Type | Home Theater System |
|---|---|
| Speaker Configuration | 5.1 Channel |
| DVD Player | Yes |
| Bluetooth | Yes |
| USB Playback | Yes |
| FM Tuner | Yes |
| Channels | 5.1 |
| Playable File Formats | MP3, WMA, JPEG |
| Playable Disc Types | DVD, CD |
| Connectivity | USB |
To Next Page
