To Next PageTo Next PageHow to fix an LG Home Theater System with no power?
If your LG Home Theater System has no power, it might be due to the power cord not being properly connected. Make sure the power cord is securely plugged into the wall outlet.
Why is my LG LH-E922PB Home Theater System remote not working?
If the remote control for your LG Home Theater System isn't working correctly, consider the following: * Ensure the remote is pointed directly at the unit's remote sensor. * Make sure you are within 20 ft (6 m) of the unit. * Remove any obstacles blocking the path between the remote and the unit. * Replace the remote's batteries with new ones.
Why is there no sound from my LG LH-E922PB?
If you experience no sound or very low audio from your LG Home Theater System, ensure that the equipment connected with the audio cable is set to receive DVD audio signal output by selecting the correct input mode on the receiver. Also, check that the audio cables are securely connected, the connected equipment is powered on, and the audio connecting cable is not damaged; replace it if necessary.
What to do if my LG Home Theater System has no picture?
If there is no picture on your LG Home Theater System, it may be because the TV is not set to receive the DVD signal output. Select the appropriate video input mode on your TV so that the picture from the DVD/CD Receiver appears on the screen. Also, ensure that the video cable is securely connected and the connected TV is turned on.
LG LH-E922PB power is on but the DVD/CD Receiver does not work, what to do?
If your LG Home Theater System's DVD/CD Receiver isn't working even though the power is on, the problem might be that no disc is inserted. Insert a disc, and check that the DVD or audio CD indicator in the DVD display is lit.
Why is the picture quality poor on my LG LH-E922PB Home Theater System?
If the playback picture quality on your LG Home Theater System is poor, try the following: * Clean the disc. * Insert a disc, ensuring the DVD or audio CD indicator is lit. * Make sure you are using a playable disc, checking the disc type, colour system, and regional code. * Place the disc with the playback side down. * Ensure the disc is correctly placed within the guide on the disc tray. * Press the SETUP button to turn off any menu screen. * Cancel any Rating function or change the rating level.
How to stop loud hum or noise from LG Home Theater System?
If you hear a loud hum or noise from your LG Home Theater System, the issue might be a dirty disc, poorly connected speakers and components, or the DVD/CD Receiver being too close to the TV. Clean the disc, securely connect the speakers and components, and move the TV away from the audio components.
Why can't my LG LH-E922PB tune into radio stations?
If your LG Home Theater System is unable to tune into radio stations, ensure the antenna is securely connected and properly positioned. If the signal strength is weak, try tuning in the station manually. If no stations are preset or have been cleared, you may need to preset the stations.
How to brighten the display on my LG Home Theater System?
To brighten a dim front panel display on your LG Home Theater System, press the DIMMER button on the Remote Control.
General| Brand | LG |
|---|---|
| Model | LH-E922PB |
| Category | Home Theater System |
| Language | English |
Explains symbols used in the manual for warnings and notes.
Provides guidance on handling, storing, and cleaning discs.
Explains symbols that may appear on the TV display during operation.
Offers advice on using the unit's touch buttons correctly and safely.
Explains regional code restrictions for DVD playback.
Describes the SIMPLINK function for LG TV control via HDMI.
Explains common file formats for discs like VCD, MP3, WMA, and JPEG.
Defines terms relevant to DVD and VCD playback structure.
Details remote control range and battery installation.
Controls for powering the unit and accessing the disc drawer.
Buttons for function selection, disc view, and media/audio inputs.
Buttons for controlling playback, searching, and adjusting volume.
Connects power and the main speaker system.
Ports for connecting various audio, iPod, and XM devices.
Outputs for connecting to TVs and displays.
Connectors for radio antennas.
Essential buttons for controlling disc playback and navigating menus.
Buttons to select input sources and tune radio or XM stations.
Controls for audio modes, video adjustments, and basic TV operations.
Initial steps for preparing the unit for operation.
Guides on connecting the main unit to various devices.
Details on connecting via component video jacks for high-quality output.
Instructions for connecting the unit's video output to a TV.
Connecting USB devices and auxiliary audio inputs.
Connecting digital audio sources via optical or coaxial cables.
Steps to safely disconnect USB devices.
Connecting portable audio devices and iPods.
Connecting FM and AM antennas for radio reception.
Explains HDMI technology for digital audio and video transmission.
Details how to change video resolution settings for different outputs.
Guides on connecting the speaker wires to the unit and speakers.
Recommendations for positioning front speakers for optimal sound.
Guidance on placing the center speaker relative to the screen.
Instructions for positioning rear speakers for surround sound effects.
Advice on placing the subwoofer for bass enhancement.
Selecting media sources like DVD/CD, USB, or iPod.
Selecting radio/XM broadcasts and auxiliary/digital inputs.
Explains various digital audio technologies like DTS and Dolby.
Describes different sound modes and virtual surround effects.
How to display disc playback information on the TV screen.
Guides on making initial adjustments via the Setup menu.
Setting languages for OSD and disc content.
Adjusting picture aspect ratio and display mode settings.
Adjusting audio dynamics, karaoke vocals, and AV sync.
Configuring speaker settings like volume, distance, and testing.
Managing DVD playback ratings, passwords, and area codes.
Settings for unlocking, PBC, DivX registration, and other options.
Procedures for opening disc trays and selecting discs.
Using DVD menus and switching camera angles during playback.
Features for speed playback, time search, and marker search.
Convenience features like screen saver, memory, timers, and mute.
How to play audio files and view ID3 tag information.
Managing programmed playback, including repeats and erasing tracks.
Displaying images, navigating files, and viewing stills.
Rotating the displayed picture clockwise or counter-clockwise.
Handling subtitles and understanding file format compatibility.
Steps for connecting and turning on the iPod and unit.
Details remote control buttons used for iPod playback.
How to operate the iPod using the remote in Remote iPod mode.
Classifies and plays music files by playlists, artists, etc.
Explains that video/photo files are not played in OSD mode.
Displays and plays the last played music file.
How to access different groups of content on DVD Audio discs.
How to navigate pages of content on DVD Audio discs.
Procedures for storing, tuning, and clearing radio stations.
How to listen to radio stations and improve reception.
Information on XM service and activation steps.
Connecting XM equipment and displaying service information.
Procedures for storing and clearing XM radio stations.
Methods for selecting XM channels via presets, direct tuning, or category.
Explains how remote buttons control LG TV functions.
Guides for setting up the remote to control non-LG TVs.
A list of codes for setting initial language preferences.
A list of country codes for setting region-specific preferences.
Solutions for power issues and when the unit is unresponsive.
Addresses problems with video display and audio output.
Resolves issues with disc playback and unwanted audio noise.
Solutions for radio tuning, remote control, and display brightness issues.
Procedures for safely handling, cleaning, and maintaining the unit.
