How to fix an LG Home Theater System that does not work properly?
Try turning off the power of the LG Home Theater System and any connected external devices (TV, Woofer, DVD-player, Amplifier, etc.) and then turn them on again. If that doesn't work, disconnect the power cord of the unit and connected devices, and then reconnect them.
Why is my LG LHB745 remote control not working properly?
The remote control might not be pointed at the unit's remote sensor, or it may be too far away. Ensure there are no obstacles between the remote and the unit. Also, check if the batteries in the remote control are exhausted.
Why is there no sound or distorted sound from my LG Home Theater System?
The unit may be in scan, slow motion, or pause mode. The sound volume might be set too low. Check the speaker cable connection.
Why is there no picture on my TV from my LG Home Theater System?
Ensure that you have selected the appropriate video input mode on your TV so that the picture from the LG Home Theater System appears on the screen. Check that the video connection is securely connected. Verify that the [HDMI Color Setting] in the [Settings] menu is set to the appropriate item that conforms to your video connection. Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts. The player’s HDMI OUT jack may be connected to a DVI device that does not support copyright protection.
What to do if my LG Home Theater System does not start playback?
Make sure you insert a playable disc, checking its type, color system, and regional code. Place the disc with the playback side down, correctly inside the guide on the disc tray. If the disc is dirty, clean it. Also, cancel the Rating function or change the rating level.
Why is the BD-Live feature not working on my LG LHB745?
The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. Ensure that the unit is correctly connected to the local area network and can access the internet. Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. The [BD-LIVE connection] option in the [Settings] menu is set to [Prohibited]. Set the option to [Permitted].
What to do if my LG LHB745 Home Theater System won't turn on or off?
Unplug the power cord, wait at least five seconds, and then plug it in again.
Why is there picture noise on my LG LHB745?
You may be playing a disc recorded in a color system different from your TV. Try setting the resolution to one that your TV accepts.
Why is my USB storage device not recognized by my LG Home Theater System?
Try using a different USB cable, as some cables may not provide enough current. Avoid using a USB extension cable or USB hub, as these can prevent recognition. Note that the LG Home Theater System does not support USB devices requiring additional program installation on a computer. This unit supports only USB Flash Drive and USB External HDD with FAT32 or NTFS format.
Why does my LG LHB745 Home Theater System keep buffering when streaming videos?
Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increasing your broadband speed is recommended.
Warnings on electric shock, laser, fire, moisture, installation, ventilation, and power cord safety.
Specific guidance on safe handling of power cords and laser system precautions.
Details on various disc formats (BD, DVD, Audio CD) and their playable content.
Detailed explanation of buttons like Power, Open/Close, Navigation, Playback, and special function buttons.
Description of the Disc Tray, Remote Sensor, Display Window, Volume Control, and USB Port.
Overview of rear connections like AC power, speaker outputs, HDMI, Antenna, AUX, and Optical.
Guidance on color-coding speaker wires and connecting them to the player.
How to connect using an HDMI cable and set TV input source to HDMI.
How SIMPLINK allows TV remote control of the player via HDMI.
Connecting analog audio devices via AUX input for sound output.
Connecting digital audio devices via Optical input for sound output.
Steps for connecting external devices to HDMI IN 1 or 2 for playback.
How to connect the player to a LAN via wired or wireless module.
Connecting the player to a router or modem using a LAN cable.
Player automatically gets an IP address via DHCP server.
Steps to manually configure IP address, Subnet Mask, Gateway, and DNS.
Connecting to a network using an access point or wireless router.
Setting up the player for network communication via wireless.
Selecting Dynamic/Static IP and applying network settings.
How to select the preferred language for menus and display.
Initial steps for network connection and performing a speaker test.
Steps to press HOME and navigate to the [Settings] menu.
Configuring settings like TV Aspect Ratio, Resolution, and Audio Output.
Configuration for wired/wireless network and checking connection status.
Controlling BD-LIVE access and configuring Smart Service/Network Play.
Options like Letter Box, Pan Scan, Original, and Full for aspect ratio.
Selecting output resolutions and setting 1080p mode to 24 Hz or 50 Hz.
Configuring [Auto], [PCM], or [DTS Re-Encode] for digital audio output.
Steps to adjust speaker volume, distance, and perform a test tone.
Setting delay for sound to synchronize with video for digital TV.
Explains categories like Movie, Photo, Music, Premium, Input, and Settings.
Steps to insert, close, and play BD, DVD, AVCHD, or Audio CD.
Controls for stopping, pausing, resuming, scanning, and slow-motion playback.
Steps to resolve unit malfunction, power issues, and playback errors.
Troubleshooting for playback, USB recognition, and remote control problems.
Solutions for BD-Live not working or streaming services stopping.
Troubleshooting for media servers not displaying or access points not found.
Solutions for no picture, picture noise, no sound, or distorted sound.
Notification process when new software is available via network.
Instructions for updating the player's software via the update server.
Cautions during update and steps after completion for new version.
General| Disc types supported | BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
|---|---|
| Playback disc formats | Blu-Ray audio, Blu-Ray video, CD audio, CD video |
| Number of optical discs | 1 discs |
| Optical disc player type | Blu-Ray player |
| Display | FLD |
| Built-in HDD | No |
| x.v.Color support | Yes |
| Apple docking compatibility | Not supported |
| Video formats supported | AVI, MKV, MP4, VOB |
| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD HR |
| RMS rated power | 1200 W |
| Audio output channels | 5.1 channels |
| Audio formats supported | AAC, FLAC, LPCM, MP3, WMA |
| RDS features | CT, PS, PTY, RT |
| Supported radio bands | FM |
| Preset stations quantity | 50 |
| Front speakers RMS power | 388 W |
| Center speaker RMS power | 194 W |
| Product color | Black |
| HDMI in | 2 |
| USB version | 2.0 |
| SCART ports quantity | 0 |
| Number of HDMI outputs | 1 |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 130 W |
| Package weight | 21300 g |
Weight and Dimensions| Main unit dimensions (WxDxH) | 410 x 260 x 55 mm |
|---|---|
| Subwoofer dimensions (WxDxH) | 191 x 318 x 388.5 mm |
| Front speaker dimensions (WxDxH) | 290 x 290 x 1150 mm |
| Center speaker dimensions (WxDxH) | 342.5 x 87 x 86 mm |
| Satellite speaker dimensions (WxDxH) | 100.5 x 95 x 148 mm |
To Next Page
