Why is my LG Receiver remote control not working?
If the LG Receiver's remote control isn't working, ensure you're pointing it directly at the receiver's remote sensor and are within a range of about 23 ft (7 m). Remove any obstacles between the remote and the receiver. If it still fails, replace the batteries with new ones.
How to troubleshoot no power on my LG LH-T3526S?
If your LG Receiver isn't powering on, the most common cause is a disconnected power cord. Ensure the power cord is securely plugged into the wall outlet.
Why is my LG LH-T3526S Receiver making a loud humming noise?
If you're hearing a loud hum or noise from your LG Receiver, start by cleaning the disc. Ensure that all speakers and components are securely connected. Also, try moving the TV away from the audio components, as they may be too close together.
What to do if there is no picture on my LG LH-T3526S Receiver?
If your LG Receiver isn't displaying a picture, ensure your TV is set to the correct video input mode to receive the DVD signal. Also, check that the video cable is securely connected. Finally, make sure the TV is powered on.
Why is there no sound on my LG Receiver?
If you experience no sound or very low sound from your LG DVD/CD Receiver, consider these solutions: * Ensure the equipment connected with the audio cable is set to receive DVD audio by selecting the correct input mode. * Check that the audio cables are securely connected to the jacks. * Verify that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it.
Why is there a loud hum or noise coming from my LG LH-T3526S?
If you hear a loud hum or noise from your LG Receiver, check these: * Clean the disc. * Ensure the speakers and components are securely connected. * Move your TV away from the audio components if the DVD/CD Receiver is located too close to the TV.
Why is there no sound coming from my LG Receiver?
If you experience no sound or very low sound from your LG Receiver, consider the following: * Verify that the equipment connected with the audio cable is set to receive DVD audio signal output. Select the correct input mode on the receiver. * Ensure the audio cables are securely connected to the jacks. * Check that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it with a new one.
How to fix LG LH-T3526S remote control that is not working?
If the remote control for your LG Receiver isn't working, make sure you're pointing it directly at the receiver's remote sensor. Ensure you are within 23 ft (7 m) of the receiver and that there are no obstacles in the way. If it still doesn't work, replace the batteries with new ones.
Why is there no sound from my LG Receiver?
If your LG Receiver has no sound or very low sound, make sure the equipment connected with the audio cable is set to receive the DVD audio signal output. Check that the audio cables are securely connected and that the connected equipment is powered on. If the issue persists, try replacing the audio connecting cable, as it may be damaged.
General| Channels | 5.1 |
|---|---|
| DVD player | Yes |
| DVD functions | Playback |
| Supported digital audio standards | Dolby Digital, DTS |
| USB Port | Yes |
| HDMI Output | Yes |
| Bluetooth | No |
To Next Page
