T
Tiffany OrtizSep 2, 2025
How to fix LG LH-TK3525Q Receiver when there is no power?
- BbrownandrewSep 2, 2025
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
To Next PageTo Next PageHow to fix LG LH-TK3525Q Receiver when there is no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if LG Home Theater System DVD/CD Receiver does not work?
If the power is on but the DVD/CD Receiver of your LG Home Theater System isn't working, insert a disc. Ensure the DVD or audio CD indicator in the DVD display is lit.
Why is my LG LH-TK3525Q Receiver remote control not working properly?
If the remote control for your LG Receiver isn't working, it could be due to several reasons: * Make sure that the remote control is pointed at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles between the remote control and the DVD/CD Receiver. * The batteries in the remote control might be flat, replace them with new ones.
Why can't my LG Home Theater System tune in radio stations?
If you're unable to tune in radio stations, first, ensure the antenna is securely connected. If you're using automatic tuning, the signal strength may be too weak, so try tuning in the station manually. If tuning by scanning preset stations, you may need to preset the stations.
What to do if there is no picture on my LG LH-TK3525Q?
If you're not getting a picture on your LG Receiver, check the following: * Ensure the TV is set to receive the DVD signal. * Verify that the video cable is securely connected into the jacks. * Confirm that the connected TV power is turned on.
What to do if there is no sound from my LG LH-TK3525Q?
If you're experiencing no sound or very low sound, ensure the equipment connected with the audio cable is set to receive DVD audio. Check that the audio cables are securely connected. Verify that the connected equipment is powered on. If the audio connecting cable is damaged, replace it.
What to do if my LG Receiver remote control does not work?
If the remote control isn't working, make sure it's pointed directly at the remote sensor on the LG DVD/CD Receiver. Also, ensure you are within 23 ft (7 m) of the receiver. Remove any obstacles between the remote and the receiver. If it still doesn't work, replace the batteries with new ones.
Why is there no sound from my LG LH-TK3525Q, or is it very quiet?
If you're not getting any sound, or the sound is very low, first check that the equipment connected with the audio cable is set to receive the DVD audio signal output. Also, make sure the audio cables are securely connected. Verify that the equipment connected with the audio cable is turned on. If the problem persists, the audio connecting cable may be damaged and need to be replaced.
Why is the picture quality poor on my LG Receiver?
If the playback picture on your LG Receiver is poor, start by cleaning the disc. Ensure a disc is inserted correctly, with the playback side down and placed within the guide. Make sure you're using a playable disc, checking the disc type, color system, and regional code. If a menu is on the screen, press the SETUP button to turn it off. If the Rating level is set, cancel the Rating function or change the rating level.
Why is there no picture on my LG Home Theater System?
If there is no picture on your LG Home Theater System, first, ensure that your TV is set to the correct video input mode to receive the DVD signal. Next, check that the video cable is securely connected. Finally, verify that the TV is powered on.
General
