Operating28
Operating
4
Radio Operations
Be sure that FM antenna is connected.
(Refer to the page 18.)
Listening to the radio
1. Press
P
FUNCTION until FM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by pressing VOL (-/+)
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned down
the volume.
1. Press
P
FUNCTION until FM appears in the
display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press
b
ENTER a preset number will ash in the
display window.
4. Press PRESET (
W/S
) to select the preset
number you want.
5. Press
b
ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7.
To listen a preset station, press PRESET
W/S
or
0 to 9 numerical buttons on the remote control.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASEALL” will ash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1. Press PRESET
W/S
to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again to delete the selected preset
number.
Improving poor FM reception
Press
d
MONO/STEREO on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
To Next Page
Loading...
Need help?
General
