LG LMV1852ST User Manual

STEP 3: Prepare The Venting Blower
– 11 –
ROOM-VENTING (Recirculating)
INSTALLATION:
1. Remove one or two blower unit mounting screw(s)
and one or several blower plate mounting screw(s).
Remove the blower plate. See Figure21.
2. Carefully lift the blower unit out of the microwave
oven.
4. Rotate blower unit 90° so the exhaust ports face
the front of the cabinet. See Figure 23.
6. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the one or several blower plate
mounting screw(s). See Figure 25.
Figure 21
Figure 25
Blower Plate
Mounting Screw
Blower Plate
Back Plate
Parts B
Blower Unit
Figure 23
Blower Unit
Blower Unit
Mounting Screw
Blower Plate
Mounting Screw
Blower Plate
Back Plate
Blower Unit
Mounting Screw
Blower Unit
Parts B
5. Place blower unit back into microwave oven.
Be sure the wires are not pinched. See Figure 24.
3. Reassemble the blower wire. See Figure 22.
Figure 24
Figure 22
See Figure 14.

LG LMV1852ST Specifications

General

Turntable	Yes
Control type	Touch
Product color	Stainless steel
Microwave power	- W
Appliance placement	Countertop
Number of power levels	10
Connected load	1000 W

Weight and Dimensions

Depth	381 mm
Width	736.6 mm
Height	406 mm
Weight	22000 g