LG LMX25981 Series - DOOR ALIGNMENT; STARTING

- 21 -
6-2 TSD AND OLP
Normal operation of
compressor is
impossible or poor.
Separate TSD-Starter
from compressor and
measure resistance
between No. 5 and 6
of PTC-Starter with a
tester.
(Figure 19)
Separate OLP from
compressor and check
resistance value
between two terminals
of OLP with a tester.
(Figure 20)
Check another
electric component.
Replace OLP.
Observation value is
115V/60Hz : 6.8
Ω±30%
The resistance value
is 0
Ω (short) or
∞ (open).
Replace
TSD-Starter.
Shows continuity
Open
Figure 19 Figure 20