26 OPERATION
Control Panel
Control Panel Features
Depending on the model, some of the following functions may not be available.
The actual control panel may dier from model to model.
Freezer
Refrigerator
Water Filter Replace
Ice Plus
Indicates the set temperature of the freezer compartment in Celsius (°C) or Fahrenheit (°F). The de-
fault freezer temperature is 0°F (-18 °C). Press the Freezer button repeatedly to select a new set
temperature from 5 °F to -7 °F (-23 °C to -15 °C).
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 43 °F to 33 °F (7 °C to 1 °C).
Replace the water lter when the Water Filter Replace indicator turns on. After replacing the water
lter, press and hold the Water Filter Replace button for three seconds to turn the indicator light
o. Replace the water lter approximately every six months.
This function increases both ice making and freezing capabilities.
Press the Ice Plus button to illuminate the icon and activate the function for 24 hours. The function
automatically shuts o after 24 hours. Stop the function manually by pressing the button once more.
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately ve seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
• When the refrigerator is in the Power Saving Mode, the display remains o until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
NOTE
NOTE
CAUTION
Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
• To deactivate / activate:
- With either refrigerator door opened, press the Express Frz. button 3 times consecutively while
pressing the Refrigerator button. The control panel beeps and the temperature settings display to
conrm that Display Mode is deactivated. Use the same procedure to activate Display Mode.
To Next Page
Loading...
Need help?
General
