10-2
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
TROUBLE SHOOTING
Electronic timer will not
accept Programming.
Electronic timer will not
accept Programming.
Clock and timer not working
Oven does not bake
(Selection is set for to BAKE
or TIMED BAKE)
Oven does not Broil
Overheating or
“runaway” oven
Oven door will not open or
latch.
Premature burnout of bake
element
Oven door dicult to open
t'BJMFENBJO1$#
t'BJMFENBJO1$#
t1PXFSPVUBHF
t-PPTFPSCBEXJSJOH
t%FGFDUJWF#",&FMFNFOU
t%FGFDUJWFFMFDUSPOJDDMPDL
t%PPSTXJUDITFOTJOHFSSPS
t-PPTFPSCBEXJSJOH
t%FGFDUJWF#30*- element
t%FGFDUJWFNBJO1$#PSSFMBZ1$#
t -PPTFPSCBEXJSJOHUPMBUDI
system
t%FGFDUJWF0WFO4FOTPS
t#BENBJO1$#
t%FGFDUJWFMBUDINFDIBOJTN
t%FGFDUJWFCFOUEPPSMBUDIMFWFr.
t Oven is still hot. Cool-down period
after self-clean cycle not complete
t Improper use of oven(e.g. being
used to heat the home)
tWorn or broken broil stop roller.
t 3FQMBDFNBJO1$#
t3FQMBDFNBJO1$#
tVerify power is present at unit.
tVerify that the circuit breaker is not tripped
t 3FQMBDFIPVTFIPMEGVTFCVUEPOPUGVTF
capacity
t3FGFSUP0XOFr’s manual instructions
t V FSJUZBMMDPOOFDUJPOTBSFDMFBOBOEUJHIU
replace broken wire
t Test and/or replace BAKE element.
t3FQMBDFNBJO1$#PSSFMBZ1$#
t Test door switch and check the point of
contact between door and door switch
t V FSJUZBMMDPOOFDUJPOTBSFDMFBOBOEUJHIU
replace broken wire
t Test and/or replace BAKE element.
t3FQMBDFNBJO1$#PSSFMBZ1$#
t3FQBJSPSSFQMBDFXJSJOH
t Test and/or replace Oven Sensor
t Test and/or replace PCB
t3FQMBDFEPPSMBUDITZTUFN
t3FQMBDFMBUDIMFWFS
t This is normal. WBJUVOUJM-0$,JDPOHPFT
out.
t6TFPWFOGPSCBLJOHPOMZ
t3FQMBDFPWFOEPPSIJOHF
PROBLEMS POSSIBLE CAUSES & FAULTS SOLUTIONS
1