[Quality][Button/Switch] Part Replacement Guide on Knob Supporter(Active SVC Request)
Service Bulletin
Product : LG Gas/Elec. Oven
Bulletin # : CVZ201900039-02
Release Date : 2020.03.13
Applicable for Serial Number : 807KMxxxxx~902KMxxxxx
1. Repair Instruction
Applicable for models
(USA) Elec. : LSE4611ST, LSE4611BD, LSE4613ST, LSE4613BD, LSE4615ST, LSE4615BM, LSE4616ST, LSE4616BD, LSE4617ST,
LTE4815ST, LTE4815BM, LTE4815BD
Gas : LSD4913ST , LSG4511ST, LSG4511BD, LSG4513ST, LSG4513BD, LSG4515BM, LSG4515ST, LTG4715ST, LTG4715BM, LTG4715BD
(Canada) Elec : LSE4611BD, LSE4611ST, LSE4617ST, LSE5613BD, LSE5613BM, LSE5613ST, LSE5615ST, LTE4815ST
Gas : LSG4515BM, LSG5513BD, LSG5513ST
Bulletin Type : SVC Notice Parts Others Applicable only with symptoms with every repair
Symptoms Knob supporter is broken when mode is selected
Picture
Cause By any reason
1) Serial number range : 807KMxxxxx~902KMxxxxx
Even if you visit a customer due to other failure,
the part must be replaced
① Replace supporter to new supporter changed material : P/No. MJH64334701(No P/No. Change)
As Is To Be
Page 1
Material Property was changed(PC → PA66)
Same shape with gloss
Same shape without gloss
Please do not replace any PCB. All kinds of PCBs
don't need to be replaced in this symptom
To Next Page
Loading...
Need help?
General
Weight and Dimensions
