Majesty Ice Dispenser Geared Motor Causing Grinding Noise
Service Bulletin
Applicable for Serial Number : 901KR** ~ 910KR** (1/1/2019 ~ 10/31/2019)
1. Repair Instruction
Page 1
Applicable for models
LFXS28596D, LFXS28596M, LFXS28596S, LFXS28968D, LFXS28968S, LFXS30726S, LFXS30766D, LFXS30766S, LFXS30796D, LFXS30796S, LMXS28596D
LMXS28596S, LMXS28626D, LMXS28626S, LRFDS3006D, LRFDS3006D, LRFDS3006S, LRFDS3006S, LRFVC2406D, LRFVC2406S, LRFVS3006D, LRFVS3006S
LRFXC2406D, LRFXC2406D, LRFXC2406S, LRFXC2406S
Bulletin Type: Quality Parts Others Applicable only with symptoms with every repair
Symptoms - BLDC geared auger motor causing a grinding noise.
Cause - Not enough grease was applied.
1) Before replacing the dispenser assembly (600C/612A), check motor’s cavity number and manufacture date.
2) If Cavity number is P,U,X or motor was produced during 1/1/2019~10/31/2019,
order a new dispenser assembly and replace
* Rework(applied grease) has been completed for applicable S/N (901~910).
“-” mark on the motor label
3) After installing a new dispenser assembly,
operate Cube/Crush mode three times for 10 seconds.
* Contact TCC if noise does not disappear
Check!!
Product : Ref
Bulletin # : CNZ201900449-01
Release Date : 2019.11.13
To Next Page
Loading...
Need help?
General
Weight and Dimensions
