1. Repair Instruction
Case ① - Mullion is normal. But not working.
Step1) Check the level of product
Step2) Raise the left door(Dispenser door)
Step3) To level the doors, insert a snap ring around the
pin of the hinge(Right door), use wrench to adjust(Left Door)
Step4) Check if the mullion works normally and the doors are even
[SVC Method] Mullion is not working / is broken
Service Bulletin
Product : Ref
Bulletin # : CNZ202000073-01
Release Date : 2020.03.16
Applicable for Serial Number : 908KR** ~ 912KR**
Applicable for models
908KR**~912KR**
LFXS28566S, LFXS26973S, LFXS28968S, LMXS28626S, LFXS26596S, LFXS28596S, LFXS26973D, LFXS28596D, LFXS28968D , LMXS28626D, LFCC22426S,
LFXS28566D LFXS28566M, LFXS28596M, LMXS28596S, LFXC22526S, LFXC22526D, LFXC22596S, LFXC22596D, LFXS26596D, LMXS28596D, LFCS27596S
Bulletin Type: Quality Parts Others Applicable only with symptoms with every repair
Symptoms
- Mullion is normal. But not working properly.
- Mullion is broken.
Picture
Cause
- Door needs to be raised.
- Mullion needs to be replaced.
※ Plesase refer to appendix (page4-5)
Case ② - Mullion is broken. (Spring is not working.)
Step1) Remove the mullion
Step2) Install the new mullion
Step3) Check if the mullion works normally
Page 1
Appendix page4 Appendix page5
(‘19.8.26 ~ ‘19.12.7)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
