-13-
3-12 CAP DUCT MOTOR REPLACEMENT
1)
Separate the Housing of the Cap Duct Motor.
3)
Replace the motor and push housing aside.
Duct Door
Cap Duct
Motor
2)
Unscrew 3 screws to disassemble the motor.
5) Insert 3 screws.
BINICE
3-13 HOW TO REMOVE
1) Grip the handles, as shown in the picture.
2) Lift the lower part slightly.
3) Take the Ice Bin out slowly.
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.
Replace the motor and check the position of the door
duct and the link for proper fit.
4)