-9-
3-8 Refrigerator Light (Top)
3-8-2 Refrigerator Light (Side)
Unplug Refrigerator, or disconnect power at the circuit
breaker.
If necessary, remove top shelf or shelves.
1. Unplug refrigerator power cord from electric outlet.
2.
Tighten a screw to the cover.
4.
Remove the LED assembly from connector.
5.
Replace LED assembly.
6. Assemble the cover.
1. Unplug refrigerator power cord from electric outlet.
2.
Tighten a screw to the cover.
3.
Pull a screw using a Plier and disassemble the cover.
3.
Pull a screw using a Plier and disassemble the cover.
4.
Remove the LED assembly from connector.
5. Replace LED assembly.
6. Assemble the cover.
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.