LG LS-J0910CL - Operating Instruction - Remote; Inserting Batteries in Remote; Remote Control Storage and Use; Understanding Operation Lamps

Owner’s Manual 11
ENGLISH
Signal
receptor
Operation indication lamps
Operating Instruction
How to insert the Batteries
Operating Instruction
Remove the battery cover by pulling it according to
the arrow direction.
Insert new batteries making sure that the (+) and (-)
of battery are installed correctly.
Reattach the cover by sliding it back into position.
Use 2 AAA(1.5volt) batteries. Do not use
rechargeable batteries.
NOTICE
• The remote controler may be stored by mounting it on
a wall.
• To operate the room air conditioner, aim the remote
control at the signal receptor.
Storage and Tips For Using the Remote Controler
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off : Lights up during the system operation.
Sleep Mode : Lights up during Sleep Mode Auto operation.
Timer : Lights up during Timer operation.
Defrost Mode : Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
Outdoor unit
operation
OUT
DOOR