18 Room Air Conditioner
Operating Instruction
or or
❏ During the JET COOL function at any moment, the A/C starts to blow the cool air at
extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is
especially used to cool the room temp. Quickly in a hot summer.
In the heat pump mode, neuro fuzzy mode, or auto changeover mode however, the JET COOL
function is not available.
❏ In order to return to the normal cooling mode from the JET COOL mode, you just press either
the operation mode selection button, airflow volume selection or temp. setting button or the
JET COOL button again.
Jet Cool Operation
Press the Start/Stop button.
The unit will respond with
a beep.
Press the Jet Cool button to operate
the speed cooling mode and the unit
will operate in super high fan speed
on cooling mode for 30 minutes.
To cancel the Jet Cool mode, press the Jet Cool button
again or the fan speed button or the room temperature
setting button and the unit will operate in high fan speed on
cooling mode.
1
2
3
To Next Page
Loading...
