LG LS-K2430CL - Indoor Unit Component Removal (18 K, 24 K); Removing the Control Box; Removing the Discharge Grille; Removing the Evaporator Assembly

2. To remove the Control Box.
• Remove 2 securing screws.
• Pull the control box out from the chassis carefully.
3. To remove the Discharge Grille.
• Remove the securing screw.
• Pressing the right side of the discharge grille
downward slightly, unhook the discharge grille.
• Pull the discharge grille out from the chassis
carefully.
4. To remove the Evaporator.
• Remove 3 screws securing the evaporator(at the
left 1EA, at the right 2EA).
- 44 -