13
Unit Operation
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
BASIC FUNCTIONS
Cooling Operation
1. On the remote control, press to turn on the indoor unit.
2. Press repeatedly until the cooling symbol (snowflake)
is displayed on the remote control display screen.
3. Press the up and down arrow buttons to increase or
decrease currently displayed temperature.
The cooling temperature range is 64 °F (18 °C) - 86 °F (30 °C).
Heating Operation
1. On the remote control, press to turn on the indoor unit.
2. Press repeatedly until the heating symbol (sun) is
displayed on the remote control display screen.
3. Press the up and down arrow buttons to increase or
decrease currently displayed temperature.
•The cooling temperature range is 60.8 ° F (16 ° C) - 86 ° F (30 ° C).
•Cooling only models do not support this function.
Air Circulation Operation
This mode circulates indoor air without changing the room
temperature.
The cooling lamp lights up in air circulation mode on the indoor unit.
1. On the remote control, press to turn on the indoor unit.
2. Press to activate air circulation operation. The fan symbol
will be displayed on the remote controller display screen.
3. Press to adjust the fan speed.
Adjusting the Fan Speed
1. Press repeatedly to adjust the fan speed. See Table 4 for
the various speed adjustments.
2. Select for natural air. The fan speed adjusts
automatically.
Table 4: Fan Speed Levels
Display Symbol Speed
High
Medium
Low
Natural Wind
Dehumidifying Operation
In order to prevent mold, this mode removes excess moisture from
an environment with high humidity or during local rainy seasons.
This mode adjusts the room temperature and the fan speed auto-
matically to maintain the optimal level of humidity.
1. On the remote control, press to turn on the indoor unit.
2. Press repeatedly until the dehumidifying symbol (raindrop)
is displayed on the remote control display screen.
•When the indoor unit is in dehumidifying mode, you cannot
adjust the room temperature. The temperature is being adjusted
automatically.
•While in dehumidifying mode, the display screen will not show the
room temperature.
Adjusting the Air Flow (Swing)
Direction
1. To adjust the direction of the air flow vertically, press
repeatedly and select the desired position.
2. Select on the remote control display screen to adjust the
desired vertical position automatically.
3. To adjust the horizontally air flow direction, press repeatedly
and select the desired position.
4. Select on the remote control display screen to adjust the
desired horizontal position automatically.
•Some models may not support adjusting air flow direction.
Check your model to be sure it is an option.
•When restarting the air conditioner, it will remember the
previously set air flow direction. As a result, the air deflector
may not accurately reflect the icon displayed on the remote
control. If this occurs, press or to adjust the direction
of the air flow again.
Cooling Operation - Adjusting the Air Flow (Swing) Direction
To Next Page
Loading...
