What does CT Sensor Error mean on my LG Air Conditioner and how can I fix it?
If your LG Air Conditioner displays a CT Sensor Error, indicating that the thermistor is disconnected or shorted out, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What to do if there is a communication failure from outdoor unit to indoor unit in my LG LS307HV3?
If your LG Air Conditioner displays a communication failure from the outdoor unit to the indoor unit, please contact LG Support. You might also try turning the unit off and then back on to see if that resolves the problem.
What to do if the outdoor unit condenser coil temperature is too high in my LG LS307HV3 Air Conditioner?
If your LG Air Conditioner displays an error indicating that the outdoor unit condenser coil temperature is too high, contact LG Support. Additionally, try power cycling the unit by turning it off and then back on.
What does DC Peak (IPM Fault) mean on my LG Air Conditioner and how can I fix it?
If your LG Air Conditioner displays a DC Peak (IPM Fault) error indicating that the compressor DC voltage was too high, contact LG Support. You can also try power cycling the unit by turning it off and then back on.
What does PSC Fault mean on my LG LS307HV3 and how can I fix it?
If your LG Air Conditioner shows a PSC Fault, indicating that the current to the inverter compressor between the AC and DC converter circuit is too high, it's recommended to contact LG Support. A simple power down and restart might also help.
What does it mean if the heat sink thermistor has disconnected or has shorted out in my LG LS307HV3?
If your LG Air Conditioner displays an error indicating that the heat sink thermistor has disconnected or has shorted out, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG Air Conditioner says the outdoor unit coil outlet (liquid line) thermistor is disconnected or shorted out?
If your LG Air Conditioner displays an error indicating that the outdoor unit coil outlet (liquid line) thermistor is disconnected or shorted out, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean if the condenser coil pipe thermistor temperature is too low in my LG LS307HV3 Air Conditioner?
If your LG Air Conditioner displays an error indicating that the condenser coil pipe thermistor temperature is too low, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does Inverter Compressor Discharge Pipe (D-Pipe) Overheat mean on my LG LS307HV3 Air Conditioner and how can I fix it?
If your LG Air Conditioner displays an error indicating Inverter Compressor Discharge Pipe (D-Pipe) Overheat, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
What does it mean when my LG LS307HV3 says the current-to-current transformer (CT) thermistor is too low?
If your LG Air Conditioner displays an error indicating that the current-to-current transformer (CT) thermistor is too low, contact LG Support. You can also try turning the air conditioner off and on again to see if that fixes the problem.
General| EER | 11.0 |
|---|---|
| Voltage | 208-230V |
| Refrigerant | R410A |
| Noise Level (Indoor) | 47 dB(A) |
| Noise Level (Outdoor) | 55 dB(A) |
| Heating Capacity | 36, 000 BTU |
| Power Supply | 208-230V/60Hz/1Phase |
| Operating Temperature (Heating) | 14~75°F |
Identifies general warnings, cautions, and specific hazards.
Guidelines for safe electrical connection and operation.
Instructions for safe installation of the air conditioner unit.
Rules for safe operation and use of the appliance.
Safety measures for cleaning, repair, and handling components.
Warnings related to unit placement and potential hazards.
Guidelines for extended use, humidity, and specific environments.
Details on indoor and outdoor unit parts and their functions.
Specifies acceptable indoor and outdoor temperature limits.
Explanation of buttons and functions on the wireless remote control.
Instructions for inserting batteries and installing the remote holder.
Important considerations for optimal remote operation.
How to use the cooling and heating modes for comfort.
Operation for removing excess moisture from the air.
How to use the mode for circulating air without temperature change.
Adjusting fan speed and directing airflow vertically/horizontally.
Instructions for setting timers and enabling sleep mode.
Rapid cooling or heating for immediate comfort.
Function to remove moisture and prevent mold inside the unit.
AI-based auto operation and auto changeover features.
How to switch between Celsius and Fahrenheit displays.
Modes for energy efficiency and adjusting screen brightness.
How to operate the unit using the power button without the remote.
Restoring previous settings after a power failure.
Information on connecting the air conditioner via Wi-Fi.
Steps to create an account for the LG Smart ThinQ app.
Process for verifying the email address for app access.
What to do if email verification fails or is not confirmed.
Steps to register the air conditioner with the server.
How to set the air conditioner to registration mode for Wi-Fi.
Connecting the product to a wireless network and router.
Confirmation message after successful product registration.
Connecting when multiple products are searched.
Specific guidance for iPhone users regarding Wi-Fi connection.
Guidelines for entering router details and product nickname.
What to do if the product isn't registered or connected to the server.
Drying procedures before use or after long periods of non-use.
Recommended cleaning intervals and specific tasks for indoor/outdoor units.
Step-by-step guide for cleaning the main air filter.
Instructions for cleaning or replacing the 3M Micro Protection Filter.
How the unit indicates errors and what the self-diagnosis function does.
Common issues and their solutions before contacting support.
Troubleshooting problems related to cool air generation.
Explains why fan speed or temperature adjustments might be unavailable.
Specific functions and limitations of the wired remote control.
To Next Page
